When minimalist elegance meets virtually limitless possibilities: With its extensive product range and outstanding technical properties, Luserna Gneis Grigio ideal stone for modern and holistic garden design.
Material information
Non-slip
Surfaces marked with this symbol have a particularly slip-resistant surface.
Frost-resistant
When installed properly, this stone is suitable for outdoor use. Please note which installation methods are appropriate for the specific stone. You can find this information on the respective product page by referring to the corresponding symbols.
Good for shaded areas
All exterior materials must have a certain degree of roughness to provide slip resistance. This characteristic inevitably makes them more prone to dirt accumulation. Stones with higher water absorption also provide a good breeding ground for algae growth.
Stones marked with this symbol are extremely hard and dense, making them particularly suitable for shaded areas and north-facing sides.
Resistant to road salt
Resistant to the use of road salt. Important for areas such as steps, building entrances, driveways, and public spaces.
Gravel Installation
Here, you have the option of installing the tiles on a gravel base. Your installation company will installation company advise you on the required tile thickness and size.
Drainage Installation
When installed on drainage mortar (single-grain mortar), a solid subbase is created that remains largely permeable to water. For more information, please contact your installation company.
Permanent installation
Suitable for installation in a mortar bed on a solid subfloor (e.g., concrete slab) with a cementitious grout. Your installation company advise you on this.
Stone type
Gneiss
Origin
Italy
Base colour
Grey
Applications
Copings
Garden edging
Paving
Window sills
Garden walls
Garden paths
Fireplace surrounds
Kitchen countertops
Pool coping
Pond landscaping
Terrace paving
Staircases
Vanity tops
Wall cladding
Garden edging
Paving
Window sills
Garden walls
Garden paths
Fireplace surrounds
Kitchen countertops
Pool coping
Pond landscaping
Terrace paving
Staircases
Vanity tops
Wall cladding
Notes
Due to the high density of this stone, the split surface has a more rustic appearance than that of other materials. Floor tiles conform to DIN EN 1341:2012, Class 1, with a tolerance of up to +/- 3 mm.
Natural stone floors can be cleaned with a neutral cleaner or water. For further natural stone care products, please contact the specialist staff at your local specialist store.
Impregnations are significant interventions in the flooring construction and must therefore be separately approved by the respective manufacturers for the material to be impregnated.
Post-oxidation of the material is possible.
Other products on this topic or
on a related topic
Outdoor-items Luserna Gneis Gialloon a related topic
Outdoor-items Luserna Gneis Misto
Wallstones-items Gneiss Misto
Available products
Random length
Random length
rough-sawn on both sides
edges sawn
in random lengths
approx. 2.0–4.0 cm thick
no machining marks on the surface
edges sawn
in random lengths
approx. 2.0–4.0 cm thick
no machining marks on the surface
40.0 cm width
Item No. 11187
Polygonal plates
Polygonal plates
rough-sawn on both sides
no drill holes
no drill holes
approx. 3–5 pieces per square meter
Approx. 2.0–4.0 cm thick
1 ton = approx. 11–13 m²
1 ton = approx. 11–13 m²
Item No. 11556
Universal parts
Universal parts
rough-sawn on both sides
one long edge thickened and chamfered to approx. 3.0 cm,
otherwise approx. 3.0–5.0 cm thick,
in random lengths of approx. 80.0–120.0 cm
no machining marks on the surface
one long edge thickened and chamfered to approx. 3.0 cm,
otherwise approx. 3.0–5.0 cm thick,
in random lengths of approx. 80.0–120.0 cm
no machining marks on the surface
40.0 cm width
Item No. 11188
Cut-to-size pieces
Cut-to-size pieces
Various surface finishes
Sawn edges
up to a maximum of approx. 220.0 x 150.0 cm
Sawn edges
up to a maximum of approx. 220.0 x 150.0 cm
3.0 cm thick, flamed and brushed
Item No. 11341
3.0 cm thick, flamed
Item No. 11176
Skirting tiles
Skirting tiles
rough-sawn
top edge bevelled
back side milled down to approx. 1.2 cm thick (+/- 3 mm)
top edge bevelled
back side milled down to approx. 1.2 cm thick (+/- 3 mm)
7.0 cm height
Item No. 11189
Walling stones
Walling stones
split on all sides
approx. 18.0–25.0 cm deep
approx. 25.0–50.0 cm long
approx. 18.0–25.0 cm deep
approx. 25.0–50.0 cm long
approx. 8.0–15.0 cm height
1 ton = approx. 2.0 m²
Item No. 11191