Our schistose quartz phyllite with a fissure-like surface adds a striking design element. It allows for the authentic representation and design of austere architecture, romantic gardens, or Asian culture. Its color range extends from black to rust-brown.
Material information
Non-slip
Surfaces marked with this symbol have a particularly slip-resistant surface.
Frost-resistant
When installed properly, this stone is suitable for outdoor use. Please note which installation methods are appropriate for the specific stone. You can find this information on the respective product page by referring to the corresponding symbols.
Good for shaded areas
All exterior materials must have a certain degree of roughness to provide slip resistance. This characteristic inevitably makes them more prone to dirt accumulation. Stones with higher water absorption also provide a good breeding ground for algae growth.
Stones marked with this symbol are extremely hard and dense, making them particularly suitable for shaded areas and north-facing sides.
Gravel Installation
Here, you have the option of installing the tiles on a gravel base. Your installation company will installation company advise you on the required tile thickness and size.
Drainage Installation
When installed on drainage mortar (single-grain mortar), a solid subbase is created that remains largely permeable to water. For more information, please contact your installation company.
Stone type
Phyllite
Origin
Portugal
Base colour
black to rust-brown
Applications
Garden edging
Paving
Garden walls
Garden paths
Screening wall
Staircases
Paving
Garden walls
Garden paths
Screening wall
Staircases
Notes
Natural stone floors can be cleaned with a neutral cleaner or water. For further natural stone care products, please contact the specialist staff at your local specialist store.
Impregnations are significant interventions in the flooring construction and must therefore be separately approved by the respective manufacturers for the material to be impregnated.
Post-oxidation of the material is possible.
Available products
Step plates
Step plates
Rough-sawn on both sides
Split along the long sides
Sawn ends
Approx. 3.0–6.0 cm thick
Split along the long sides
Sawn ends
Approx. 3.0–6.0 cm thick
100.0 x 50.0 cm
1 piece = approx. 70 kg
Item No. 10943
150.0 x 50.0 cm
1 piece = approx. 100 kg
Item No. 10632
Steles
Steles
Rough-sawn on both sides
Long sides split
1 end split, 1 end sawn
Approx. 5.0–8.0 cm thick
Long sides split
1 end split, 1 end sawn
Approx. 5.0–8.0 cm thick
200.0–220.0 x 8.0–12.0 cm
1 piece = approx. 35 kg
Item No. 10638
Wall panels
Wall panels
Rough-sawn on both sides
Long sides split
Ends sawn
Long sides split
Ends sawn
200.0 x 50.0 cm, approx. 3.0–7.0 cm thick
1 piece = approx. 150 kg
Item No. 11601
250.0 x 50.0 cm, approx. 3.0–7.0 cm thick
1 piece = approx. 180 kg
Item No. 10962
250.0 × 100.0 cm, approx. 3.0–7.0 cm thick
1 piece = approx. 340 kg
Item No. 11647
250.0 x 50.0 cm, approx. 6.0–10.0 cm thick Limited stock
1 piece = approx. 270 kg
Item No. 10633
Upright slabs
Upright slabs
Rough-sawn on both sides
Long sides split
Ends sawn
Long sides split
Ends sawn
250.0 x 25.0 cm, approx. 3.0–7.0 cm thick
1 piece = approx. 90 kg
Item No. 11648
Block steps
Block steps
Rough-sawn on both sides
Long sides split
Ends sawn
Long sides split
Ends sawn
100.0 x 35.0 x 15.0 (+/- 2.0) cm
1 piece = approx. 140 kg
Item No. 10805
Walling stones
Walling stones
Approx. 15.0–35.0 cm deep,
Uncut lengths up to approx. 50.0 cm
Uncut lengths up to approx. 50.0 cm
approx. 5.0–25.0 cm height
1 ton = approx. 2 m²
Item No. 10636