A stone for individualists: unconventional, surprising, stylish. The rare color of Rio Dorado Rosé captivates with its vibrancy and lends its surroundings an appearance that is at times harmonious, at times polarizing.
Material information
Non-slip
Surfaces marked with this symbol have a particularly slip-resistant surface.
Frost-resistant
When installed properly, this stone is suitable for outdoor use. Please note which installation methods are appropriate for the specific stone. You can find this information on the respective product page by referring to the corresponding symbols.
Resistant to road salt
Resistant to the use of road salt. Important for areas such as steps, building entrances, driveways, and public spaces.
Gravel Installation
Here, you have the option of installing the tiles on a gravel base. Your installation company will installation company advise you on the required tile thickness and size.
Drainage Installation
When installed on drainage mortar (single-grain mortar), a solid subbase is created that remains largely permeable to water. For more information, please contact your installation company.
Permanent installation
Suitable for installation in a mortar bed on a solid subfloor (e.g., concrete slab) with a cementitious grout. Your installation company advise you on this.
Stone type
Quartzite
Origin
Brazil
Base colour
pale yellowish
Applications
Copings
Flooring
Window sills
Garden paths
Pool surrounds
Terrace paving
Staircases
Flooring
Window sills
Garden paths
Pool surrounds
Terrace paving
Staircases
Notes
The transitions between the three color selections are seamless. This means that the rose-colored selection may contain some yellow or white sections.
Due to natural variations, fine “hairline cracks” may occur during the production of hand-edged format slabs and polygonal slabs. These are a natural occurrence and do not impair the technical properties. They are therefore not grounds for complaint.
Hand-edged format slabs in accordance with DIN EN 1341:2012 Class 0, with a length and width tolerance of up to +/- 2.0 cm.
Random length format slabs with sawn edges in accordance with DIN EN 1341:2012 Class 1, with a length and width tolerance of up to +/- 3 mm.
Due to natural variations, fine “hairline cracks” may occur during the production of hand-edged format slabs and polygonal slabs. These are a natural occurrence and do not impair the technical properties. They are therefore not grounds for complaint.
Hand-edged format slabs in accordance with DIN EN 1341:2012 Class 0, with a length and width tolerance of up to +/- 2.0 cm.
Random length format slabs with sawn edges in accordance with DIN EN 1341:2012 Class 1, with a length and width tolerance of up to +/- 3 mm.
Natural stone floors can be cleaned with a neutral cleaner or water. For further natural stone care products, please contact the specialist staff at your local specialist store.
Impregnations are significant interventions in the flooring construction and must therefore be separately approved by the respective manufacturers for the material to be impregnated.
Other products on this topic or
on a related topic
Outdoor-items Rio Dorado Yellowon a related topic
Outdoor-items Rio Dorado Light
Available products
Polygonal plates
Polygonal plates
rough-sawn on both sides
approx. 4–8 pieces per square meter
Approx. 2.5–4.0 cm thick
1 ton = approx. 12.0–14.0 m²
1 ton = approx. 12.0–14.0 m²
Item No. 10330
Cut-to-size pieces
Cut-to-size pieces
rough-sawn on both sides
Edges sawn
up to a maximum of 120.0 x 50.0 cm
Edges sawn
up to a maximum of 120.0 x 50.0 cm
approx. 2.0–5.0 cm thick
Item No. 00382
Skirting tiles
Skirting tiles
rough-sawn
top edge bevelled
back side milled to approx. 1.2 cm thick (+/- 2 mm)
top edge bevelled
back side milled to approx. 1.2 cm thick (+/- 2 mm)
7.0 cm height
Item No. 00385