To capture the charm of antique stone flooring, the surface of Sahara Antik undergoes a special treatment. This gives the stone its velvety appearance. Large-format slabs, which have an elegant look all on their own, pair beautifully with classic woods and the ambiance of English gardens.
Material information
Non-slip
Surfaces marked with this symbol have a particularly slip-resistant surface.
Frost-resistant
When installed properly, this stone is suitable for outdoor use. Please note which installation methods are appropriate for the specific stone. You can find this information on the respective product page by referring to the corresponding symbols.
Resistant to road salt
Resistant to the use of road salt. Important for areas such as steps, building entrances, driveways, and public spaces.
Gravel Installation
Here, you have the option of installing the tiles on a gravel base. Your installation company will installation company advise you on the required tile thickness and size.
Drainage Installation
When installed on drainage mortar (single-grain mortar), a solid subbase is created that remains largely permeable to water. For more information, please contact your installation company.
Permanent installation
Suitable for installation in a mortar bed on a solid subfloor (e.g., concrete slab) with a cementitious grout. Your installation company advise you on this.
Roman pattern
Laying in a French/Roman pattern: Tiles of various sizes are combined in a fixed arrangement. Several laying variations exist.
Stone type
hard sandstone
Origin
India
Base colour
yellowish-green, reed-colored
Applications
Copings
Garden edging
Paving
Window sills
Garden walls
Garden paths
Fireplace surrounds
Pool coping
Pond landscaping
Terrace paving
Staircases
Vanity tops
Garden edging
Paving
Window sills
Garden walls
Garden paths
Fireplace surrounds
Pool coping
Pond landscaping
Terrace paving
Staircases
Vanity tops
Notes
Natural stone floors can be cleaned with a neutral cleaner or water. For further natural stone care products, please contact the specialist staff at your local specialist store.
Impregnations are significant interventions in the flooring construction and must therefore be separately approved by the respective manufacturers for the material to be impregnated.
Available products
Format Tiles
Format Tiles
split-faced and brushed
hand-edged
Back side milled down to approx. 2.5 cm (+/- 5 mm)
hand-edged
Back side milled down to approx. 2.5 cm (+/- 5 mm)
29.5 x 29.5 cm
Item No. 10180
60.0 x 29.5 cm
Item No. 10181
60.0 x 60.0 cm
Item No. 10182
90.0 x 60.0 cm
Item No. 10183
Roman pattern
Roman pattern
split-faced and brushed
hand-edged
Back side milled down to approx. 2.5 cm (+/- 5 mm)
(Joint approx. 1.0 cm)
hand-edged
Back side milled down to approx. 2.5 cm (+/- 5 mm)
(Joint approx. 1.0 cm)
Laying pattern – 3 sizes
29.5 x 29.5 cm
60.0 x 29.5 cm
60.0 x 60.0 cm
1 set = 1.60 m²
(available only as a set containing all 3 sizes)
60.0 x 29.5 cm
60.0 x 60.0 cm
1 set = 1.60 m²
(available only as a set containing all 3 sizes)
Item No. 10732
Laying pattern – 4 sizes
29.5 x 29.5 cm
60.0 x 29.5 cm
60.0 x 60.0 cm
90.0 x 60.0 cm
1 set = 3.22 m²
(available only as a set containing all 4 sizes)
60.0 x 29.5 cm
60.0 x 60.0 cm
90.0 x 60.0 cm
1 set = 3.22 m²
(available only as a set containing all 4 sizes)
Item No. 10509
Cut-to-size pieces
Cut-to-size pieces
Surface: split-sawn & brushed
Back: split-sawn
Edges: sawn
Up to approx. 170.0 x 80.0 cm
Back: split-sawn
Edges: sawn
Up to approx. 170.0 x 80.0 cm
approx. 2.0–5.0 cm thick
Item No. 10474
Skirting tiles
Skirting tiles
split-faced & brushed
top edge bevelled
back side milled down to approx. 1.2 cm thick (+/- 3 mm)
top edge bevelled
back side milled down to approx. 1.2 cm thick (+/- 3 mm)
7.0 cm height
Item No. 10551