We highly recommend this wonderfully warm stone to landscape architects who are passionate about creative arrangements and unique designs. Its wide variety of shapes and subtle color gradients—ranging from yellow to beige to mint—give it a very natural look and allow it to blend seamlessly into a lush, plant-filled setting.
Material information
Non-slip
Surfaces marked with this symbol have a particularly slip-resistant surface.
Frost-resistant
When installed properly, this stone is suitable for outdoor use. Please note which installation methods are appropriate for the specific stone. You can find this information on the respective product page by referring to the corresponding symbols.
Resistant to road salt
Resistant to the use of road salt. Important for areas such as steps, building entrances, driveways, and public spaces.
Gravel Installation
Here, you have the option of installing the tiles on a gravel base. Your installation company will installation company advise you on the required tile thickness and size.
Drainage Installation
When installed on drainage mortar (single-grain mortar), a solid subbase is created that remains largely permeable to water. For more information, please contact your installation company.
Permanent installation
Suitable for installation in a mortar bed on a solid subfloor (e.g., concrete slab) with a cementitious grout. Your installation company advise you on this.
Roman pattern
Laying in a French/Roman pattern: Tiles of various sizes are combined in a fixed arrangement. Several laying variations exist.
Stone type
hard sandstone
Origin
India
Base colour
yellowish-green, reed-colored
Applications
Copings
Garden edging
Paving
Window sills
Garden walls
Garden paths
Slope stabilization
Pool coping
Pond landscaping
Terrace paving
Staircases
Vanity tops
Garden edging
Paving
Window sills
Garden walls
Garden paths
Slope stabilization
Pool coping
Pond landscaping
Terrace paving
Staircases
Vanity tops
Notes
Natural stone floors can be cleaned with a neutral cleaner or water. For further natural stone care products, please contact the specialist staff at your local specialist store.
Impregnations are significant interventions in the flooring construction and must therefore be separately approved by the respective manufacturers for the material to be impregnated.
Available products
Format Tiles
Format Tiles
split-faced
hand-planed
Back side milled down to approx. 2.5 cm (+/- 5 mm)
hand-planed
Back side milled down to approx. 2.5 cm (+/- 5 mm)
19.5 x 19.5 cm In-stock item being discontinued
Item No. 10693
29.5 x 29.5 cm
Item No. 10696
40.0 x 40.0 cm In-stock item being discontinued
Item No. 10695
60.0 x 29.5 cm
Item No. 10698
60.0 x 40.0 cm
Item No. 10697
60.0 x 60.0 cm
Item No. 10699
90.0 x 60.0 cm
Item No. 10700
Roman pattern
Roman pattern
split-faced
hand-planed
Back side milled down to approx. 2.5 cm (+/- 5 mm)
(Joint approx. 1.0 cm)
hand-planed
Back side milled down to approx. 2.5 cm (+/- 5 mm)
(Joint approx. 1.0 cm)
Laying pattern , size – 3 sizes
29.5 x 29.5 cm
60.0 x 29.5 cm
60.0 x 60.0 cm
1 set = 1.60 m²
(available only as a set containing all 3 sizes)
60.0 x 29.5 cm
60.0 x 60.0 cm
1 set = 1.60 m²
(available only as a set containing all 3 sizes)
Item No. 10745
Laying pattern , sizes 4
29.5 x 29.5 cm
60.0 x 29.5 cm
60.0 x 60.0 cm
90.0 x 60.0 cm
1 set = 3.22 m²
(available only as a set containing all 4 sizes)
60.0 x 29.5 cm
60.0 x 60.0 cm
90.0 x 60.0 cm
1 set = 3.22 m²
(available only as a set containing all 4 sizes)
Item No. 10746
Laying pattern – 5 sizes
19.5 x 19.5 cm
39.5 x 19.5 cm
40.0 x 40.0 cm
60.0 x 40.0 cm
60.0 x 60.0 cm
1 set = 1.42 m²
(available only as a set containing all 5 sizes)
39.5 x 19.5 cm
40.0 x 40.0 cm
60.0 x 40.0 cm
60.0 x 60.0 cm
1 set = 1.42 m²
(available only as a set containing all 5 sizes)
Item No. 10727
Cut-to-size pieces
Cut-to-size pieces
rough-sawn on both sides
Edges sawn
up to a maximum of approx. 170.0 x 80.0 cm
Edges sawn
up to a maximum of approx. 170.0 x 80.0 cm
approx. 2.0–5.0 cm thick
Item No. 00498
Skirting tiles
Skirting tiles
rough-sawn
top edge bevelled
back side milled down to approx. 1.2 cm thick (+/- 3 mm)
top edge bevelled
back side milled down to approx. 1.2 cm thick (+/- 3 mm)
7.0 cm height
Item No. 00507
Block steps
Block steps
Split-rough
Bottom milled
Sides tapered (+/- 1.0 cm)
Bottom milled
Sides tapered (+/- 1.0 cm)
100.0 x 35.0 x 15.0 cm
Item No. 09813
150.0 x 35.0 x 15.0 cm
Item No. 10421
Walling stones
Walling stones
Rough-split joints
Otherwise split
And slightly reworked (+/- 2.0 cm)
Approx. 20.0 cm deep
Approx. 30.0 – 50.0 cm long
Otherwise split
And slightly reworked (+/- 2.0 cm)
Approx. 20.0 cm deep
Approx. 30.0 – 50.0 cm long
Approx. 5.0 cm layer height
1 ton = approx. 2.0 m²
Item No. 10614
Approx. 10.0 cm layer height
1 ton = approx. 2.0 m²
Item No. 10615
Approx. 15.0 cm layer height
1 ton = approx. 2.0 m²
Item No. 10616
Combined configuration for all 3 layer heights
20% of a 5.0 cm layer height
45% of a 10.0 cm layer height
35% of a 15.0 cm layer height
(1 ton = approx. 2.0 m²)
45% of a 10.0 cm layer height
35% of a 15.0 cm layer height
(1 ton = approx. 2.0 m²)
Item No.
Upright slabs
Upright slabs
two sides with rough edges
otherwise tapered (+/- 2.0 cm)
otherwise tapered (+/- 2.0 cm)
100.0 x 25.0 x 10.0 cm In-stock item being discontinued
Item No. 10089
Paving stones
Paving stones
Top and bottom: split
Otherwise split
Otherwise split
approx. 9.0 x 9.0 cm, approx. 7.0–9.0 cm thick
1.0 ton = approx. 7.0 m²
Item No. 10101